Lash Glue Magic Bond - Savings Kit // USE CODE BLACK27 FOR EXTRA 27% OFF - AURA Monaco (2024)

The best lash glue we have ever had. Only for absolute full professionals. Lasts up to 10 weeks with very low fumes at the same time.

– 2x 5g Magic Bond eyelash glue
– you SAVE 10€!
– for 1 to 1, volume & mega volume
– 0.5(!) seconds drying time
– slightly more liquid consistency than Hyper Magnetic
– lasts up to 10 weeks – produces hardly any fumes
– extremely deep black
– our latest generation of glues
– 1A glue dots, no stringing
– incl. silica gel bag. Silica gel and adhesive bag
– no creeping up on Fans
– for any temperature & humidity
– lasts 3 months from opening

1. pierce the neck of the bottle before first use.
2. press the eyelash glue cleaning cloth firmly onto the neck of the bottle and shake for 30 seconds.
3. apply very light pressure to the bottle with your finger and place a small dot of glue on a suitable surface. A jade stone or crystal glass base is best, as these surfaces keep the glues cool.
4. Remove the lashes from the lash strip and dip them into the center of the drop. Do NOT wipe off the glues.
5. Apply the lash to the natural lash.

Important: Especially for our fast lash glue you need to be skilled and work quickly. A drying time of, for example, 0.5 seconds means that you only have 0.5 seconds to apply the artificial lash after the first contact with the natural lash.

Drying time too slow:
– You have applied the lash quickly enough, but each time you have to leave the lashes separated for longer so that they do not stick together
– the individual lashes stick together because you already want to continue with the next lash, even though the glues have not yet dried on the previously applied lash. Drying time too fast:
– The lash is already stuck quite firmly to the natural lash, but you actually want to reposition it, which is difficult to do
– The artificial lash cannot be attached to the natural lash

If this is the case, the eyelash glue has already dried before you have applied the eyelash completely and correctly. Your working speed is still too slow. You should choose a slower lash glue.

How else can I tell that my eyelash glue is too fast for me?
If your client’s artificial eyelashes fall out immediately after the treatment when brushing through
If your client has lost most of her eyelashes after just a few days.

Both are clear signs that the lash glue is drying faster than you are working. You apply the lashes, but the glue has already dried and can therefore not develop its full effect.

Notice: There is no shame in starting with a slower glue first and then working your way up. On the contrary, you will achieve much more durable and better results, even at the beginning.

The Superstar, Champion V2, Power Plus V2, Sensitive V2, Perform V2, Unique Power V2:
ETHYL-2-CYANACRYLATE, POLYISOCYANATE, POLYMETHYLMETHACRYLATE, N-METHYL-2-PYRROLIDONE, CARBON BLACK.

Magic Bond: ETHYL-2-CYANOACRYLATE, ALKOXY-2-CYANOACRYLATE, POLYMETHYL METHACRYLATE, CARBON BLACK.

Hyper Magnetic: ETHYL-2-CYANOACRYLATE, POLY ISOCYANATE, POLYMETHYL METHACRYLATE, N-METHYL PYRROLIDONE, CARBON BLACK.

The following glues are suitable for the volume technique:

Hyper Magnetic – extremely fast (0.3 – 0.5 sec.)
Magic Bond – extremely fast (0.5 sec.)
The Superstar – very fast (0.5 – 1 sec.)
Champion V2 – fast (1 – 2 sec.)

Which lash glue you need depends on how fast you already work.

Top professional:
Hyper Magnetic
Magic Bond
The Superstar

Pro:
Champion
Power Plus V2

Advanced:
Unique Power V2

Beginners:
Perform V2

each level:
Sensitive V2

You should store your glues as follows:

– in the supplied glues bag
– tightly closed
– upright
– cool, protected from light, dry
– only in the refrigerator in an emergency
– close immediately after use

Our glues work best under the following conditions:

Humidity: 30% to 85%
Room temperature: 19°C to 27°C

You have different conditions? Even then, you can work very well with our glues. However, there may be minor restrictions, for example, you may have to renew the glue drop earlier.

As a general rule, do not let these values unsettle you too much. One’s own feeling and working style usually play a much bigger role.

While you’re working with an lash glue, smell the fumes. Your customers do this too. This is completely normal.
You can take the following measures to make the treatment as pleasant as possible: Wear a mask
Use an AURA Monaco activated carbon filter mask to reduce the impact of the fumes.

If necessary, you can also put this mask on your customers.

Blow, blow, blow!
You should blow on the glue spots with a puster as often as possible or use a mini ventilator for this purpose. This reduces the fumes in the close environment and also ensures better through-drying of the lash glue.

Sufficient ventilation
You should only ever work with eyelash glue in well-ventilated rooms. So it is best to put a window on tilt. Small rooms are rather unsuitable for lash gluing. In very warm months, a window or the front door of your salon should be open as permanently as possible.